Top 5 Boiler Problems and how to fix them.

Do you need help with your Boiler problem? If you find that your boiler isn’t working properly when you turn it on it may be time to call a plumber but, always depends on the problem. There are some boiler issues that you can discover yourself before calling an engineer. Whenever your boiler needs professional help or an emergency plumber you will understand the signs that your boiler will have.
Check these tips from Near Plumber!

The most common problems with Boilers

1. No heating or hot water

2. Leaking Boiler

3. Noisy Boiler

4. Boiler turns off itself

5. No pilot lights

NO Heating or Hot Water
This one requires you to contact an engineer. If seals are broken, there is a malfunctioning flue allowing a draft to enter, or deposits have accumulated in the system, the pilot light may be blown out. It might also be caused by a defective thermocouple, which monitors and responds to the interior temperature of the boiler.

Leaking boiler
A leaky boiler should be investigated by a gas-safe engineer since there may be a loose connection, defective component, or corrosion. It may have been caused by excessive water pressure, but a water leak should still be repaired by a professional because can be dangerous.

Noisy boiler

Boilers may create a variety of noises, including gurgling, vibrating, and slamming, as well as whistling or ‘kettling’. The most typical cause of a noisy boiler is limescale buildup on the heat exchanger, but it might also be due to a loss in water pressure, trapped air, a system obstruction, or pump failure.
Check the water pressure, ensure that the exterior condensate pipe has not frozen and formed an obstruction, and try bleeding the radiators to remove any trapped air that may be the problem. If none of these measures are effective, a heating engineer may need to flush the system with specific chemicals to eliminate obstructions and limescale.

The boiler turns off itself
Boilers include automated safety features that force them to shut down when specific concerns are detected, such as low water pressure, gas supply problems, a broken part, or a system obstruction. Before hiring an engineer, check the water pressure, bleed the radiators, and ensure that the gas supply is functioning properly.

No pilot lights

Are facing with this boiler Problems. You’ll need to contact an engineer for this one. If seals are compromised, there is a malfunctioning flue allowing a draft, or deposits have accumulated in the system, the pilot light may be blown out. A defective thermocouple, which monitors and reacts to the interior temperature of the boiler, might also create this problem.

Comments are closed